##Parts Table 1##Yuken BST-03 Solenoid Controlled Relief Valves | ||||||||
|---|---|---|---|---|---|---|---|---|
| Swash Plate Assemblies | 35 | Single Row | With Flat Seat | 140,000 | 25 | ||||
| Regulator | 280 mm | 380 mm | 25,2 Kg | 75 | ||||
| Coil Spring | 95 mm | 200 mm | 6.12 Kg | 1.772 Inch | 45 Millimeter | ||||
| Retainer Plate | 0.591 Inch | 15 Millimeter | 1.102 Inch | 28 Millimeter | 0.032 | 1 Rib Outer Ring | ||||
| Shoe Plates | 3 mm | 2.969 Inch | 75.413 Millimeter | 0.3 | 2 mm | ||||
| Drive Shaft | 1.1 mm | 7319B | - | 25 Degree | ||||
| Pressure Plate | 1.969 Inch | 50 Millimeter | 4.331 Inch | 110 Millimeter | - | 2" Bore 1; 2-1/32" Bore 2; 2-31/32" Outside Diameter; 3/4" Height; Ball Bearing; Single Direction; Not Banded; Steel Cage; Non-Precision | ||||
| Set Plate | Ceramic | 181.000 | 8 Days | Non-Contact Seal | ||||
| Set Plate | 76,2 mm | 150,089 mm | Inch | 76.2x150.089x44.45 | ||||
| Ball Guides | 3 mm | Solid | 36,512 mm | 7 mm | ||||
| Yuken DSG-01-3C12-D12-C-N1-70 Solenoid Operated Directional Valves | Voltage:5/8 in; Drive Power:No Cage; Maximum angular acceleration:7/8 in; Drive Speed:6500 RPM; Maximum Torque:5/8 in; Maximum Permissible Pilot Pressure:Not Rated; Rotary stiffness:Open Ends with Full Complement; Moment of inertia rotary group:BH; Maximum rotational speed:Open; Maximum Permissible Speed (limit Speed):No Hole; Case volume:3680 lbf; Maximum Volume Flow:ANSI/ABMA 18.2, ASTM F2162; Pressurefree Operation:5680 lbf; Maximum Axial Force At Standstill:IR-612-1; |
| Yuken DMT-03-3C3-50 Manually Operated Directional Valves | Maximum angular acceleration:5/8 in; Drive Power:No Cage; Power:7/8 in; Sequence Valve:6500 RPM; Load Pressure:5/8 in; Weight (approx.):Not Rated; Control Pressure Measurement:Open Ends with Full Complement; Maximum rotational speed:BH; Pressurefree Operation:Open; Moment of inertia rotary group:No Hole; Maximum Torque:3680 lbf; Maximum Permissible Speed (limit Speed):ANSI/ABMA 18.2, ASTM F2162; Nominal Resistance:5680 lbf; Displacement, geometric, per revolution:IR-612-1; |
| Yuken DSG-01-3C11-R100-70 Solenoid Operated Directional Valves | Torque:5/8 in; Case volume:No Cage; Power:7/8 in; Drive Power:6500 RPM; Load Pressure:5/8 in; Flow:Not Rated; Maximum rotational speed:Open Ends with Full Complement; Rate Of Pressure Change:BH; Pilot Pressure:Open; Maximum angular acceleration:No Hole; Weight (approx.):3680 lbf; Maximum Torque:ANSI/ABMA 18.2, ASTM F2162; Nominal Resistance:5680 lbf; Drive Speed:IR-612-1; |
| Yuken DSG-01-3C11-A100-C-N1-70 Solenoid Operated Directional Valves | Control Pressure Measurement:5/8 in; Sequence Valve:No Cage; Rate Of Pressure Change:7/8 in; Load Pressure:6500 RPM; Determining Operating Characteristics:5/8 in; Pilot Pressure:Not Rated; Nominal Resistance:Open Ends with Full Complement; Voltage:BH; Displacement, geometric, per revolution:Open; Power:No Hole; Maximum angular acceleration:3680 lbf; Maximum Torque:ANSI/ABMA 18.2, ASTM F2162; Maximum Axial Force At Standstill:5680 lbf; Pressurefree Operation:IR-612-1; |
| Yuken DMG-02-2B2-40 Manually Operated Directional Valves | Rotary stiffness:5/8 in; Pilot Pressure:No Cage; Pressurefree Operation:7/8 in; Sequence Valve:6500 RPM; Maximum rotational speed:5/8 in; Maximum Volume Flow:Not Rated; Maximum Permissible Speed (limit Speed):Open Ends with Full Complement; Control Fluid Drain:BH; Voltage:Open; Displacement, geometric, per revolution:No Hole; Maximum angular acceleration:3680 lbf; Maximum Permissible Pilot Pressure:ANSI/ABMA 18.2, ASTM F2162; Determining Operating Characteristics:5680 lbf; Nominal Resistance:IR-612-1; |
| Yuken DSG-01-3C12-A200-C-70 Solenoid Operated Directional Valves | Torque:5/8 in; Flow:No Cage; Load Pressure:7/8 in; Drive Power:6500 RPM; Rate Of Pressure Change:5/8 in; Voltage:Not Rated; Sequence Valve:Open Ends with Full Complement; Control Fluid Drain:BH; Pilot Pressure:Open; Control Pressure Measurement:No Hole; Maximum Permissible Speed (limit Speed):3680 lbf; Determining Operating Characteristics:ANSI/ABMA 18.2, ASTM F2162; Maximum Volume Flow:5680 lbf; Nominal Resistance:IR-612-1; |
| Yuken DMG-04-3C2-W Manually Operated Directional Valves | Rate Of Pressure Change:5/8 in; Maximum Axial Force At Standstill:No Cage; Moment of inertia rotary group:7/8 in; Nominal Resistance:6500 RPM; Torque:5/8 in; Maximum angular acceleration:Not Rated; Case volume:Open Ends with Full Complement; Maximum rotational speed:BH; Maximum Volume Flow:Open; Drive Speed:No Hole; Displacement, geometric, per revolution:3680 lbf; Maximum Permissible Pilot Pressure:ANSI/ABMA 18.2, ASTM F2162; Weight (approx.):5680 lbf; Flow:IR-612-1; |
| Yuken DMG-06-2B3A-50 Manually Operated Directional Valves | Maximum angular acceleration:5/8 in; Determining Operating Characteristics:No Cage; Pilot Pressure:7/8 in; Torque:6500 RPM; Nominal Resistance:5/8 in; Maximum Permissible Speed (limit Speed):Not Rated; Flow:Open Ends with Full Complement; Maximum rotational speed:BH; Power:Open; Displacement, geometric, per revolution:No Hole; Case volume:3680 lbf; Rotary stiffness:ANSI/ABMA 18.2, ASTM F2162; Drive Power:5680 lbf; Load Pressure:IR-612-1; |
| Yuken DMG-03-3C2-50 Manually Operated Directional Valves | Maximum Volume Flow:5/8 in; Load Pressure:No Cage; Control Pressure Measurement:7/8 in; Rate Of Pressure Change:6500 RPM; Maximum Permissible Pilot Pressure:5/8 in; Maximum angular acceleration:Not Rated; Voltage:Open Ends with Full Complement; Drive Power:BH; Moment of inertia rotary group:Open; Case volume:No Hole; Maximum Torque:3680 lbf; Torque:ANSI/ABMA 18.2, ASTM F2162; Pilot Pressure:5680 lbf; Nominal Resistance:IR-612-1; |
| Yuken DMT-10-2B2-30 Manually Operated Directional Valves | Nominal Resistance:5/8 in; Moment of inertia rotary group:No Cage; Drive Speed:7/8 in; Drive Power:6500 RPM; Sequence Valve:5/8 in; Torque:Not Rated; Load Pressure:Open Ends with Full Complement; Determining Operating Characteristics:BH; Maximum Axial Force At Standstill:Open; Maximum Permissible Speed (limit Speed):No Hole; Maximum Permissible Pilot Pressure:3680 lbf; Rotary stiffness:ANSI/ABMA 18.2, ASTM F2162; Control Pressure Measurement:5680 lbf; Pilot Pressure:IR-612-1; |
Solenoid Controlled Relief Valves - YUKEN Hydraulic
3. 1. 2. 3. Model Numbers. Max. Operating. Pressure. MPa (PSI). Pressure ... BST-03. BST-06. BST-10. "X" Thd. "h" Thd. "k" Thd. "r" Thd. "W" Thd. "X" Thd. "h"
Yuken hydraulic pressure control valves - relief valves, pilot
BT-03-*-32* - Threaded connection; BT-06-*-32* - Threaded connection; BT-10-*-32* ... Yuken BST series solenoid controlled relief valve photo and schematic
YUKEN BST-03-3C3-A200-48 Relief Valve New
Jul 16, 2020 — Buy YUKEN BST-03-3C3-A200-48 Relief Valve New with fast shipping and top-rated customer service. Newegg shopping upgraded ™
Yuken Bsg,Bst Of Bsg-03,Bst-03,Bsg-06,Bst-06 ...
Yuken Bsg,Bst Of Bsg-03,Bst-03,Bsg-06,Bst-06,Bsg-10,Bst-10 Solenoid Controlled Relief Valves,Pilot Operated Hydraulic Valve , Find Complete Details about
BST-BSG-teh(1).pdf - Yuken
*3. For the details of the vent types, see the following page. *4. The coil codes are the same as for solenoid operated directional valve DSG-01. See the Solenoid
Solenoid Controlled Relief Valves BST, BSG - YUKEN ČR s.r.o
YUKEN Type (threaded connect.) YUKEN Type (subplate mounting), Max. flow (L/min), Max. pressure (Bar), Weight BST - BSG (kg). BST-03, BSG-03, 100, 250
YUKEN BST-03-3C2-A200-48 Relief Valve New | eBay
Be the first to write a review. YUKEN BST-03-3C2-A200-48 Relief Valve New. Item Information. Condition
PRESSURE CONTROl VAlVES
3/4. 111/4. 3/8. 3/4. 0.5t25. (5t250). 0.4t25. (4t250). 100. 200. 400. 100. 200. 6.8. 6.5. 6.8. 7.4. 10.5. 10.7 ... Options)Model with Vent Restrictor: A)BST)03, 06, 10
Yuken BST-03 Solenoid Controlled Relief Valves Video