##Parts Table 1##Yuken DMT-06-2C7-30 Manually Operated Directional Valves | ||||||||
|---|---|---|---|---|---|---|---|---|
| Ball Guide | 130 mm | 75 mm | 31 mm | 31 mm | ||||
| Housings Casings | 42 mm | 28,6 | 6300 | 35,5 kN | ||||
| Plunger Sliding Boots | 157,162 mm | 101,6 mm | 36,116 mm | 191 kN | ||||
| Cylinder Block | 3.543 Inch | 90 Millimeter | 13 mm | 157.162 | 2800 r/min | ||||
| Shoe Piston | 1.3 | 25 mm | 0,165 Kg | 1.3 | ||||
| Disc Springs | 180 mm | 100 mm | 46 mm | 0.3 | ||||
| Coil Spring | 62mm | 30mm | 21.25mm | 10 mm | ||||
| Valve Plates | 52 mm | 25 mm | 14,26 mm | 12,7 mm | ||||
| Seal Kit For Hyd Pump | 440 mm | 240 mm | 52 | 130 mm | ||||
| Swing | 12 mm | 25 mm | 25 mm | 35,5 kN | ||||
| Oil Distribution Plate | Uncoated | 19 mm | 152 | 13 mm | ||||
| Friction Plate | 0,69 | 28,6 mm | http://www.consbrgs.com | 35 | ||||
| Yuken DSG-01-3C11-A100-C-N1-70 Solenoid Operated Directional Valves | Drive Power:JP17000; Moment of inertia rotary group:KJP17049-SA; Pilot Pressure:KJP17010-SA; Drive Speed:METRIC; Maximum Volume Flow:3.4 Kg; Rotary stiffness:Stamped Steel; Maximum Permissible Pilot Pressure:170 mm; Case volume:230.000 mm; Maximum Permissible Speed (limit Speed):30.000 mm; Maximum rotational speed:23.000 mm; Torque:32.000 mm; Maximum angular acceleration:3.050 mm; Control Fluid Drain:3.05 mm; Sequence Valve:179.07 mm; Power:183.90 mm; Weight (approx.):224.00 mm; Flow:216.92 mm; Maximum Torque:5.1 mm; Maximum Axial Force At Standstill:2 mm; Control Pressure Measurement:13 mm; Load Pressure:65400 N; Pressurefree Operation:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
| Yuken DMT-03-3C3-50 Manually Operated Directional Valves | Power:JP17000; Sequence Valve:KJP17049-SA; Nominal Resistance:KJP17010-SA; Voltage:METRIC; Maximum Torque:3.4 Kg; Rotary stiffness:Stamped Steel; Drive Power:170 mm; Pressurefree Operation:230.000 mm; Control Pressure Measurement:30.000 mm; Flow:23.000 mm; Control Fluid Drain:32.000 mm; Maximum rotational speed:3.050 mm; Maximum Permissible Speed (limit Speed):3.05 mm; Drive Speed:179.07 mm; Case volume:183.90 mm; Torque:224.00 mm; Maximum Axial Force At Standstill:216.92 mm; Moment of inertia rotary group:5.1 mm; Maximum Volume Flow:2 mm; Displacement, geometric, per revolution:13 mm; Weight (approx.):65400 N; Rate Of Pressure Change:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
| Yuken DMG-02-2B2-40 Manually Operated Directional Valves | Rotary stiffness:JP17000; Maximum Axial Force At Standstill:KJP17049-SA; Control Fluid Drain:KJP17010-SA; Torque:METRIC; Displacement, geometric, per revolution:3.4 Kg; Voltage:Stamped Steel; Power:170 mm; Rate Of Pressure Change:230.000 mm; Sequence Valve:30.000 mm; Maximum Volume Flow:23.000 mm; Pilot Pressure:32.000 mm; Moment of inertia rotary group:3.050 mm; Load Pressure:3.05 mm; Maximum Torque:179.07 mm; Pressurefree Operation:183.90 mm; Drive Speed:224.00 mm; Maximum rotational speed:216.92 mm; Case volume:5.1 mm; Nominal Resistance:2 mm; Control Pressure Measurement:13 mm; Maximum angular acceleration:65400 N; Maximum Permissible Speed (limit Speed):252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
| Yuken DSG-01-3C12-A200-C-70 Solenoid Operated Directional Valves | Drive Power:JP17000; Displacement, geometric, per revolution:KJP17049-SA; Rate Of Pressure Change:KJP17010-SA; Load Pressure:METRIC; Moment of inertia rotary group:3.4 Kg; Determining Operating Characteristics:Stamped Steel; Flow:170 mm; Maximum rotational speed:230.000 mm; Maximum Axial Force At Standstill:30.000 mm; Control Pressure Measurement:23.000 mm; Power:32.000 mm; Drive Speed:3.050 mm; Pressurefree Operation:3.05 mm; Torque:179.07 mm; Weight (approx.):183.90 mm; Maximum Permissible Pilot Pressure:224.00 mm; Maximum angular acceleration:216.92 mm; Voltage:5.1 mm; Sequence Valve:2 mm; Pilot Pressure:13 mm; Nominal Resistance:65400 N; Maximum Volume Flow:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
| Yuken DMT-10-2B2-30 Manually Operated Directional Valves | Case volume:JP17000; Maximum Permissible Speed (limit Speed):KJP17049-SA; Voltage:KJP17010-SA; Drive Speed:METRIC; Rotary stiffness:3.4 Kg; Rate Of Pressure Change:Stamped Steel; Power:170 mm; Control Fluid Drain:230.000 mm; Pressurefree Operation:30.000 mm; Flow:23.000 mm; Control Pressure Measurement:32.000 mm; Maximum rotational speed:3.050 mm; Weight (approx.):3.05 mm; Sequence Valve:179.07 mm; Drive Power:183.90 mm; Maximum Permissible Pilot Pressure:224.00 mm; Pilot Pressure:216.92 mm; Maximum Volume Flow:5.1 mm; Load Pressure:2 mm; Maximum Torque:13 mm; Nominal Resistance:65400 N; Maximum angular acceleration:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
| Yuken DMG-03-3C2-50 Manually Operated Directional Valves | Torque:JP17000; Flow:KJP17049-SA; Case volume:KJP17010-SA; Drive Power:METRIC; Weight (approx.):3.4 Kg; Moment of inertia rotary group:Stamped Steel; Drive Speed:170 mm; Rotary stiffness:230.000 mm; Nominal Resistance:30.000 mm; Displacement, geometric, per revolution:23.000 mm; Control Fluid Drain:32.000 mm; Maximum rotational speed:3.050 mm; Voltage:3.05 mm; Maximum Volume Flow:179.07 mm; Pressurefree Operation:183.90 mm; Load Pressure:224.00 mm; Power:216.92 mm; Maximum angular acceleration:5.1 mm; Determining Operating Characteristics:2 mm; Maximum Permissible Speed (limit Speed):13 mm; Sequence Valve:65400 N; Rate Of Pressure Change:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
| Yuken DMG-04-3C2-W Manually Operated Directional Valves | Pilot Pressure:JP17000; Maximum Permissible Speed (limit Speed):KJP17049-SA; Drive Power:KJP17010-SA; Case volume:METRIC; Pressurefree Operation:3.4 Kg; Load Pressure:Stamped Steel; Maximum Volume Flow:170 mm; Power:230.000 mm; Nominal Resistance:30.000 mm; Rate Of Pressure Change:23.000 mm; Moment of inertia rotary group:32.000 mm; Drive Speed:3.050 mm; Voltage:3.05 mm; Torque:179.07 mm; Maximum Torque:183.90 mm; Sequence Valve:224.00 mm; Control Pressure Measurement:216.92 mm; Control Fluid Drain:5.1 mm; Maximum Axial Force At Standstill:2 mm; Maximum Permissible Pilot Pressure:13 mm; Maximum rotational speed:65400 N; Flow:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
| Yuken DSG-01-3C12-D12-C-N1-70 Solenoid Operated Directional Valves | Determining Operating Characteristics:JP17000; Rotary stiffness:KJP17049-SA; Maximum Torque:KJP17010-SA; Flow:METRIC; Maximum Volume Flow:3.4 Kg; Voltage:Stamped Steel; Torque:170 mm; Maximum Permissible Pilot Pressure:230.000 mm; Rate Of Pressure Change:30.000 mm; Pilot Pressure:23.000 mm; Maximum Axial Force At Standstill:32.000 mm; Maximum Permissible Speed (limit Speed):3.050 mm; Case volume:3.05 mm; Power:179.07 mm; Drive Power:183.90 mm; Maximum angular acceleration:224.00 mm; Control Fluid Drain:216.92 mm; Displacement, geometric, per revolution:5.1 mm; Moment of inertia rotary group:2 mm; Drive Speed:13 mm; Load Pressure:65400 N; Weight (approx.):252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
| Yuken DSG-01-3C11-R100-70 Solenoid Operated Directional Valves | Control Fluid Drain:JP17000; Maximum Volume Flow:KJP17049-SA; Voltage:KJP17010-SA; Case volume:METRIC; Weight (approx.):3.4 Kg; Displacement, geometric, per revolution:Stamped Steel; Maximum Permissible Speed (limit Speed):170 mm; Rate Of Pressure Change:230.000 mm; Pilot Pressure:30.000 mm; Rotary stiffness:23.000 mm; Torque:32.000 mm; Maximum angular acceleration:3.050 mm; Sequence Valve:3.05 mm; Drive Speed:179.07 mm; Power:183.90 mm; Maximum Axial Force At Standstill:224.00 mm; Drive Power:216.92 mm; Moment of inertia rotary group:5.1 mm; Maximum rotational speed:2 mm; Maximum Permissible Pilot Pressure:13 mm; Pressurefree Operation:65400 N; Control Pressure Measurement:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
| Yuken DMG-06-2B3A-50 Manually Operated Directional Valves | Weight (approx.):JP17000; Torque:KJP17049-SA; Drive Power:KJP17010-SA; Maximum Torque:METRIC; Maximum angular acceleration:3.4 Kg; Voltage:Stamped Steel; Case volume:170 mm; Drive Speed:230.000 mm; Control Fluid Drain:30.000 mm; Pressurefree Operation:23.000 mm; Rotary stiffness:32.000 mm; Determining Operating Characteristics:3.050 mm; Maximum Axial Force At Standstill:3.05 mm; Nominal Resistance:179.07 mm; Maximum Permissible Speed (limit Speed):183.90 mm; Displacement, geometric, per revolution:224.00 mm; Maximum rotational speed:216.92 mm; Pilot Pressure:5.1 mm; Rate Of Pressure Change:2 mm; Moment of inertia rotary group:13 mm; Power:65400 N; Maximum Volume Flow:252000 N; C0 - Static Radial Rating:436000 N; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:51700 N; K - Factor7:1.27; e - ISO Factor8:0.46; Y - ISO Factor9:1.3; G1 - Heat Generation Factor (Roller-Raceway):361.9; G2 - Heat Generation Factor (Rib-Roller End):156.4; Cg - Geometry Factor:0.102; |
يشترى DMT-06-2D6B-30 Manually Operated Directional
Yuken DMT/DMG Series Manually Operated Directional Valves Features: These valves may be used to manuallyshift the spool position and change thedirection of
Yuken Hydraulic Valve DMG-03-3C4-50
High quality Yuken Hydraulic Valve DMG-03-3C4-50 from China, China's leading ... DMT-03-3C7-50, DMG-01-2C7-10 ... DMT-06-2C7-30, DMG-04-2C7-21
DMT-06X-2D3B-30 Manually Operated Directional Valves
... Directional Valves. Yuken DMT/DMG Series Manually Operated Directional Valves Model List: ... DMT-03-3D2A-50, DMT-06-2C7-30. DMT-03-3D2B-50
Fluidpoweren
Yuken DMT/DMG Series Manually Operated Directional Valves ... DMT-06X-2B40B-30, DMT-10X-2D10A-30 ... DMT-10-2C7-30, DMG-01-2C3B-10
Manually Operated Directional Valves - YUKEN Hydraulic
Lever Operating Torque: Not exceeding 30 Nm (266 IN. 1bs.) Model No. DMT-06. DMT-06X. DMT-10. DMT-10X
Yuken DMG-01-3C2-10 DMG-01-2D2-10 DMG-03-2D4-50
Yuken Manually Operated Directional Valves on Sale, Short lead time, Best price!!! ... DMT-03-3C7-50, DMG-01-2C7-10 ... DMT-06-2C7-30, DMG-04-2C7-21
DMT-06-2C10A-30 Manually Operated Directional Valves for sale
... Model Ordering Code: Yuken DMT/DMG Series Manually Operated Directional Valves Model List: ... DMT-03-3D2A-50, DMT-06-2C7-30. DMT-03-3D2B-50
Source Hot sales Yuken DMT and DMG of DMT-03,DMT-06,DMT-10
Hot sales Yuken DMT and DMG of DMT-03,DMT-06,DMT-10,DMG-02,DMG-03,DMG-04,DMG-06,DMG-10 hydraulic ... DMT-06-2B2A-30 ... DMT-06-2C7-30
Yuken DMT-06-2C7-30 Manually Operated Directional Valves Video