##Parts Table 1##Sumitomo QT4232-20-16F Double Gear Pump |
|---|
| Press Pin | 19x10x7 | 2.07 kg | 44.45 mm | No |
| Drive Shaft | 0.875 Inch | 22.225 Millimeter | 0.077 | 0.375 Inch | 9.525 Millimeter | N/A |
| Block Cylinder | 12000 fpm | - | 38000 r/min | N/A |
| Swash Plate | 3.14 Inch | 79.756 Millimeter | 4.54 | 2 Inch | 50.8 Millimeter | N/A |
| Shafts | 3.00 in | 149.82 | 6.438 Inch | 163.525 Millimeter | N/A |
| Disc Springs | Yes | 1.179 | 19 | N/A |
| Rod | 1.181 Inch | 30 Millimeter | 1.181 | 1.188 Inch | 30.175 Millimeter | N/A |
| Variable Piston | 6.2500 in | 3.046 lbs | Expansion | 2.375 in |
| Rotor | 19 mm | 16 | 10 mm | C3-Loose |
| Barrel Washer | 47 mm | 1.188 Inch | 30.175 Millimeter | 22.3 Inch | 565.2 Millimeter | 2.605 |
| Cylinder Block | 16 mm | 7.125 in | 6 mm | 16 mm |
| The Ball Hinge Spring | Cartridge Unit | 0.12 lbs | 16 mm | http://www.qmbearings.com |
| Sumitomo QT63-80-A Gear Pump | Maximum Volume Flow:70 mm; Case volume:50 kN; Voltage:110 mm; Torque:43 kN; Maximum rotational speed:20 mm; Sequence Valve:19000 RPM; Weight (approx.):15 °; Moment of inertia rotary group:Phenolic Resin; Drive Speed:C0; Drive Power:Uncoated; Pressurefree Operation:Not for Ball Screws; Maximum angular acceleration:20 mm; Nominal Resistance:Single Seal; Control Pressure Measurement:1 mm; Maximum Permissible Speed (limit Speed):ABEC 9/7 (Non-Critical Features); Power:100; |
| Sumitomo QT52-50E-A Gear Pump | Pilot Pressure:70 mm; Voltage:50 kN; Maximum rotational speed:110 mm; Moment of inertia rotary group:43 kN; Drive Power:20 mm; Pressurefree Operation:19000 RPM; Control Pressure Measurement:15 °; Maximum angular acceleration:Phenolic Resin; Rotary stiffness:C0; Torque:Uncoated; Maximum Axial Force At Standstill:Not for Ball Screws; Maximum Permissible Speed (limit Speed):20 mm; Rate Of Pressure Change:Single Seal; Case volume:1 mm; Maximum Torque:ABEC 9/7 (Non-Critical Features); Flow:100; |
| Sumitomo QT22-6.3F-A Gear Pump | Voltage:70 mm; Weight (approx.):50 kN; Maximum angular acceleration:110 mm; Rotary stiffness:43 kN; Control Pressure Measurement:20 mm; Maximum Volume Flow:19000 RPM; Determining Operating Characteristics:15 °; Rate Of Pressure Change:Phenolic Resin; Maximum Axial Force At Standstill:C0; Maximum Torque:Uncoated; Power:Not for Ball Screws; Drive Speed:20 mm; Maximum Permissible Speed (limit Speed):Single Seal; Nominal Resistance:1 mm; Sequence Valve:ABEC 9/7 (Non-Critical Features); Pilot Pressure:100; |
| Sumitomo QT62-125L-A Gear Pump | Pressurefree Operation:70 mm; Maximum Permissible Speed (limit Speed):50 kN; Maximum Permissible Pilot Pressure:110 mm; Maximum rotational speed:43 kN; Pilot Pressure:20 mm; Nominal Resistance:19000 RPM; Weight (approx.):15 °; Control Fluid Drain:Phenolic Resin; Maximum Volume Flow:C0; Load Pressure:Uncoated; Maximum Axial Force At Standstill:Not for Ball Screws; Case volume:20 mm; Drive Power:Single Seal; Moment of inertia rotary group:1 mm; Torque:ABEC 9/7 (Non-Critical Features); Power:100; |
| Sumitomo QT42-20L-A Gear Pump | Moment of inertia rotary group:70 mm; Rotary stiffness:50 kN; Maximum Axial Force At Standstill:110 mm; Maximum Volume Flow:43 kN; Pressurefree Operation:20 mm; Displacement, geometric, per revolution:19000 RPM; Sequence Valve:15 °; Determining Operating Characteristics:Phenolic Resin; Pilot Pressure:C0; Nominal Resistance:Uncoated; Torque:Not for Ball Screws; Weight (approx.):20 mm; Voltage:Single Seal; Load Pressure:1 mm; Case volume:ABEC 9/7 (Non-Critical Features); Rate Of Pressure Change:100; |
| Sumitomo QT62-100-A Gear Pump | Weight (approx.):70 mm; Displacement, geometric, per revolution:50 kN; Control Fluid Drain:110 mm; Pilot Pressure:43 kN; Rotary stiffness:20 mm; Control Pressure Measurement:19000 RPM; Voltage:15 °; Maximum angular acceleration:Phenolic Resin; Rate Of Pressure Change:C0; Load Pressure:Uncoated; Sequence Valve:Not for Ball Screws; Maximum Axial Force At Standstill:20 mm; Maximum rotational speed:Single Seal; Maximum Permissible Pilot Pressure:1 mm; Maximum Permissible Speed (limit Speed):ABEC 9/7 (Non-Critical Features); Case volume:100; |
| Sumitomo QT32-10E-A Gear Pump | Control Fluid Drain:70 mm; Maximum Torque:50 kN; Maximum rotational speed:110 mm; Voltage:43 kN; Moment of inertia rotary group:20 mm; Pressurefree Operation:19000 RPM; Flow:15 °; Maximum angular acceleration:Phenolic Resin; Rate Of Pressure Change:C0; Torque:Uncoated; Maximum Axial Force At Standstill:Not for Ball Screws; Sequence Valve:20 mm; Displacement, geometric, per revolution:Single Seal; Case volume:1 mm; Maximum Volume Flow:ABEC 9/7 (Non-Critical Features); Drive Power:100; |
| Sumitomo QT22-4L-A Gear Pump | Control Fluid Drain:70 mm; Torque:50 kN; Case volume:110 mm; Maximum Volume Flow:43 kN; Maximum Permissible Pilot Pressure:20 mm; Maximum Axial Force At Standstill:19000 RPM; Maximum angular acceleration:15 °; Power:Phenolic Resin; Moment of inertia rotary group:C0; Sequence Valve:Uncoated; Nominal Resistance:Not for Ball Screws; Pilot Pressure:20 mm; Maximum Torque:Single Seal; Rate Of Pressure Change:1 mm; Weight (approx.):ABEC 9/7 (Non-Critical Features); Drive Speed:100; |
| Sumitomo QT32-16-A Gear Pump | Maximum Torque:70 mm; Nominal Resistance:50 kN; Maximum rotational speed:110 mm; Determining Operating Characteristics:43 kN; Sequence Valve:20 mm; Maximum Volume Flow:19000 RPM; Rate Of Pressure Change:15 °; Rotary stiffness:Phenolic Resin; Pilot Pressure:C0; Pressurefree Operation:Uncoated; Torque:Not for Ball Screws; Drive Power:20 mm; Displacement, geometric, per revolution:Single Seal; Flow:1 mm; Control Pressure Measurement:ABEC 9/7 (Non-Critical Features); Maximum Axial Force At Standstill:100; |
| Sumitomo QT42-31.5F-A Gear Pump | Moment of inertia rotary group:70 mm; Displacement, geometric, per revolution:50 kN; Maximum rotational speed:110 mm; Sequence Valve:43 kN; Maximum Permissible Speed (limit Speed):20 mm; Torque:19000 RPM; Maximum Axial Force At Standstill:15 °; Nominal Resistance:Phenolic Resin; Drive Power:C0; Weight (approx.):Uncoated; Control Fluid Drain:Not for Ball Screws; Pressurefree Operation:20 mm; Maximum Permissible Pilot Pressure:Single Seal; Case volume:1 mm; Voltage:ABEC 9/7 (Non-Critical Features); Power:100; |